TDFM-9300
The TDFM-9300 is similar to the TDFM-9000 except that, instead of supporting six RF modules, the TDFM-9300 supports up to four P25 All-Band modules, PLUS one analog module. The available analog modules are:
VHF Lo (30 to 50 MHz),
VHF/AM 118 to 136 MHz (aeronautical band),
UHF/AM 225 to 400 MHz (military band),
T6 Multi-Band Analog 30-50MHz / 107.9-117.9MHz / 118-156MHz / 225-400MHz
Project 25 Airborne FM
TDFM-9000
TDFM-9200
TDFM-9100
TDFM-9300
RC-9000
RC-9100
TDFM-136B
Capabilities of the TDFM-9300 Include:
- The new All-Band P25 module can support analog/digital operation on the full FM Band spectrum (VHF, UHF, and 7/800) or can be configured to support operation on any mix of all three bands, two bands, or on any single band.
- Radio modules can be individually configured to include any P25 options such as trunking, encryption, OTAR, etc.
- Optional P25 Phase 1 (FDMA) and Phase 2 (TDMA) Trunking is also available.
- Optional Encryption protocols: AES, DES, DES-OFB, DES-XL.
- Standard ADP Encryption
- Available Multiple Encryption Keys: 128 Common Key Reference (CKR) or 16 Physical Identifier Reference (PID) keys.
- Each radio module can store 3000 channels and can be programmed to operate in digital or analog mode on a channel-by-channel basis.
- Each radio module independently supports SCAN across its entire frequency spectrum.
- Built-in audio switching allows multiple RF modules in combined or separate transceiver configurations.
- New User 1, User 2 operator configuration
- Supports simulcast and cross-band repeat.
- Dimensions: 4.5” (H), 5.75” (W) and 8.5” (D)
The analog band is easily operated and programmed via the front panel keypad. The P25 modules are programmed using Motorola APX-CPS programming software.
Downloadable files
- TDFM-9300 Brochure
- TDFM-9300 Installation Guide (Rev F)
- TDFM-9300 Installation Guide (Rev. D, Issue 4)
- TDFM-9300 Operating Instructions (Rev. H) **Operating Instructions Rev. E and onward are for use with the latest software version 2.00**
- TDFM-9300 Operating Instructions (Rev. G) **Operating Instructions Rev. E and onward are for use with the latest software version 2.00**
- View the Latest Software Update Information
- TDFM-9300 Operating Instructions (Rev. C) **For use with the previous software version 1.21.**
- TDFM-9300 3D-CAD (.Step) File
- APX CPS Software and Programming Cable Guide
Contact Us
240 Traders Blvd
Mississauga ON Canada
L47 1W7
(905) 890-2113
(905) 890-5338
Dir. Federal / Military/ OEM Sales & Programs
Jim Huddock / (612) 231-9020
Sales Manager
Mike Hradil / (905) 890-2113 Ext. 216